RV-10

A Vans RV-10 with a Lycoming Thunderbolt and a Garmin G3X system.

25 December 2019

Ignition Breaker wire isolater

›
I ended up putting 3 mechanical breakers on the co-pilots side console for the ignition coil packs and two ignitions. These circuits are fed...
14 December 2019

FlyEfii Coil Bracket

›
If you remember when I got my System32, I struggled with how to mount the 3 coils forward of the firewall. A lot of people had just been usi...
2 comments:
15 September 2019

Battery Monitoring

›
I ended up with two EarthX ETX900-VNT batteries in N5412K. To monitor the batteries, I have a couple of things going on. First off, I have t...
02 September 2019

VPX-PRO configuration

›
Don't read this diagram and post as my final electrical configuration, however the diagram at this point is pretty close to my final MAI...

Avionics Status Update

›
I don't have much to say here other than we can see the light at the end of the tunnel! I debated early on having the wiring harness mad...
01 September 2019

Tanks

›
I have been putting this off for so long. I think it was really the idea of the tank having a massive leak that made me wait so long before ...

GTN650 G3X wiring

›
I spent a good hour and a half today trying to figure out how to get the GTN650, GTX45R, and the PFD talking to each other. Finally after ge...
‹
›
Home
View web version

About Me

Jeff Karrels
View my complete profile
Powered by Blogger.